Genie 43650 Operator's Manual

Contents

Genie 43650 Operator's Manual Manual pdf 17 page image

Part No. 43650 Genie S-80 & Genie S-85 15Operator's ManualSecond Edition · Fifth PrintingCheck the Tire PressureThis procedure does not needto be performed on machinesequipped with the foam-filledtire option.Bodily injury hazard. An over-inflated tire can explode and couldcause death or serious injury.Tip-over hazard. Do not usetemporary flat tire repair products.To safeguard maximum stability, achieveoptimum machine handling and minimize tirewear, it is essential to maintain proper pressurein all air-filled tires.1 Check each tire with an air pressure gauge. Addair as needed.Tire specificationsTire size 15-22.5SATPressure 100 psi6.89 barThe ScheduleThere are five types of maintenance inspectionsthat must be performed according to a schedule—daily, quarterly, six months, annual, two year. Toaccount for repeated procedures, theScheduledMaintenance Procedures Section and theMaintenance Inspection Report have been dividedinto five subsections—A, B, C, D and E. Use thefollowing chart to determine which group(s) ofprocedures are required to perform a scheduledinspection.Inspection Table or ChecklistDaily or every 8 hours AQuarterly or every 250 hours A + BSix months or every 500 hours A + B + CAnnual or every 1000 hours A + B + C + DTwo year or every 2000 hours A + B + C + D + EMaintenance Inspection ReportThe maintenance inspection report containschecklists for each type of scheduled inspection.Make copies of theMaintenance Inspection Reportto use for each inspection. Store completed formsfor three years.MAINTENANCEScheduled MaintenanceThe scheduled maintenance items must becompleted by a person trained and qualified toperform maintenance on this machine according tothe procedures found in the service manual for thismachine.Inspections and maintenance described belowrequire the qualified entity to record and retainrecords of all inspections and maintenance itemsfor four years.Machines that have been out of service for morethan three months must receive the quarterlyinspection before placing the machine back intoservice.