Genie S-80 & Genie S-85 Part No. 43650Operator's Manual Second Edition· Fifth PrintingCopyright © 1994 by Genie IndustriesFirst Edition: First Printing, August 1994Second Printing, February 1995Third Printing, March 1996Fourth Printing, September 1996Fifth Printing, October 1996Second Edition: First Printing, November 1996Second Printing, March 1997Third Printing, March 1998Fourth Printing, August 1999Fifth Printing, July 2000"Genie" is a registered trademark ofGenie Industries in the U.S.A. and many othercountries. "S" is a trademark of Genie Industries.These machines comply withANSI/SIA 92.5-1992.Printed on recycled paperPrinted in U.S.A.®ImportantRead, understand and obey these safety rules andoperating instructions before operating this machine.Only trained and authorized personnel shall bepermitted to operate this machine. This manualshould be considered a permanent part of yourmachine and should remain with the machine at alltimes. If you have any questions, call Genie Industries.ContentsPageSafety Rules .............................................................. 1Controls ..................................................................... 7Pre-operation Inspection ........................................... 10Maintenance ............................................................. 12Function Tests .......................................................... 16Work Place Inspection .............................................. 22Operating Instructions ............................................... 23Transport Instructions ............................................... 27Decals ...................................................................... 28Specifications ........................................................... 30Contact us:Internet: http://www.genielift.come-mail: techpub@genieind.com