Genie 43650 Operator's Manual
                                 | |
4 Genie S-80 & Genie S-85 Part No. 43650Operator's Manual Second Edition· Fifth PrintingDo not place or attach overhanging loads to anypart of this machine.Do not place ladders or scaffolds in platform oragainst any part of this machine.Do not use machine on a moving or mobile surfaceor vehicle.Be sure all tires are in good condition, air-filled tiresare properly inflated and lug nuts are properlytightened.Models with 750 lb (340 kg) Capacity: Do notuse air-filled tires. Models are equipped with foam-filled tires. The wheel weight and the propercounterweight configuration are critical for machinestability.Do not use the platform controls to free a platformthat is caught, snagged or otherwise preventedfrom normal motion by an adjacent structure. Allpersonnel must be removed from the platformbefore attempting to free the platform using theground controls.Fall HazardsOccupants must wear asafety belt or harness inaccordance withgovernmental regulations.Attach lanyard to anchorprovided in platform.Do not sit, stand or climb on the platform guardrails. Maintain a firm footing on the platform floor atall times.Do not climb down from the platform when raised.Keep the platform floor clear of debris.Lower the platform entry mid-rail or close the entrygate before operating.Bodily Injury HazardDo not operate the machine with a hydraulic oil orair leak. An air or hydraulic leak can penetrateand/or burn skin.Always operate machine in a well-ventilated area toavoid carbon monoxide poisoning.SAFETY RULES |
Related manuals for Genie 43650
manualsdatabase
Your AI-powered manual search engine