Genie GS-1530 Operator's Manual

Also see for GS-1530: Operator's manual Service and repair manual Operator's manual Operator's manual Operator's manual

Contents

Genie GS-1530 Operator's Manual Manual pdf 26 page image

Operator's Manual Sixth Edition • First Printing24 GS-30 • GS-32 • GS-46 Part No. 227286InspectionsPre-operation InspectionR Be sure that the operator’s, safety andresponsibilities manuals are complete, legibleand in the storage container located in theplatform.R Be sure that all decals are legible and in place.See Inspections section.R Check for hydraulic oil leaks and proper oillevel. Add oil if needed. See Maintenancesection.R Check for battery fluid leaks and proper fluidlevel. Add distilled water if needed. SeeMaintenance section.Check the following components or areas fordamage, improperly installed or missing parts andunauthorized modifications:R Electrical components, wiring andelectrical cablesR Hydraulic hoses, fittings, cylinders andmanifoldsR Battery pack and connectionsR Drive motorsR Wear padsR Tires and wheelsR Ground strapR Limit switches, alarms and hornR Alarms and beacons (if equipped)R Nuts, bolts and other fastenersR Platform entry chain or gateR Brake release componentsR Safety ArmR Platform overload componentsR Pothole guardsR Platform extensionR Scissor pins and retaining fastenersR Platform control joystickCheck entire machine for:R Cracks in welds or structural componentsR Dents or damage to machineR Excessive rust, corrosion or oxidationR Be sure that all structural and other criticalcomponents are present and all associatedfasteners and pins are in place and properlytightened.R Be sure side rails are installed and bolts arefastened.R Be sure that the chassis trays are closed andlatched and the batteries are properlyconnected.Note: If the platform must be raised to inspect themachine, make sure the safety arm is in place.See Operating Instructions section.