Genie GS-1530 Operator's Manual

Also see for GS-1530: Operator's manual Service and repair manual Operator's manual Operator's manual Operator's manual

Contents

Genie GS-1530 Operator's Manual Manual pdf 47 page image

Operator's ManualSixth Edition • First PrintingPart No. 227286 GS-30 • GS-32 • GS-46 45Operating InstructionsEmergency StopPush in the red Emergency Stop button to the offposition at the ground controls or the platformcontrols to stop all functions.Repair any function that operates when eitherEmergency Stop button is pushed in.Emergency Lowering1 Pull the emergency lowering knob.Operation From Ground1 Turn the key switch to ground control.2 Pull out both ground and platform redEmergency Stop buttons to the on position.3 Be sure the battery pack is connected beforeoperating the machine.To Position Platform1 Move the up/down toggle switch according tothe markings on the control panel.Drive and steer functions are not available from theground controls.Operation From Platform1 Turn the key switch to platform control.2 Pull out the ground and platform red EmergencyStop buttons to the on position.3 Be sure the battery pack is connected beforeoperating the machine.To Position Platform1 Press the lift function selectbutton.2 Press and hold the function enableswitch on the control handle.3 Move the control handle according to themarkings on the control panel.To Position with Outriggers (GS-3232 models)To extend the outriggers:1 Press and hold the function enablebutton.2 Press and hold the outrigger extendbutton.The outriggers will begin to extend. Theindividual outrigger indicator light will turn solidgreen as the corresponding outrigger makescontact with the ground. Continue pressing thefunction enable and the outrigger extend buttonsuntil the lift enable indicator light turns green and abeep is heard. The machine is now level.When the lift error indicator light turns red, theup/down and drive functions are disabled. The lifterror indicator light will turn red under the followingconditions.• The platform is raised to 6.7 m and theoutriggers are not deployed.• Not all outriggers are in contact with the ground.• All four outriggers are in contact with the groundbut the machine is not level.• Error code.