Genie GS-2632 Operators Manual With Maintenance Information

Also see for GS-2632: Operator's manual Service and repair manual Operator's manual Operator's manual Maintenance manual

Contents

Genie GS-2632 Operators Manual With Maintenance Information Manual pdf 36 page image

Operator's Manual Fourth Edition • Third Printing34 GS-2032 • GS-2632 Part No. 1000033SpecificationsModel GS-2032Height, working maximum 26 ft 8.1 mHeight, platform maximum 20 ft 6.1 mHeight, stowed maximum 79 1 / 2 in 2.01 mRails up - ANSIHeight, stowed maximum 70 in 1.78 mRails loweredHeight, stowed maximum 55 1 / 2 in 1.41 mRails offHeight, guard rails - 39 in 99 cmANSI, CSA and AustraliaWidth 32 in 81.3 cmLength, stowed 96 1/ 4 in 2.44 mLength, platform extended 131 1 / 4 in 3.33 mMaximum load capacity 800 lbs 363 kgMaximum wind speedIndoor use (AUS) 0 mph 0 m/sOutdoor (ANSI & AUS) 28 mph 12.5 m/sWheelbase 73 in 1.85 mTurning radius (outside) 83 1 / 2 in 2.12 mTurning radius (inside) 0 in 0 cmGround clearance 31 / 2 in 8.9 cmGround clearance 3/ 4 in 1.9 cmPothole guards deployedWeight See Serial Label(Machine weights vary with option configurations)Power source 4 Batteries, 6V 225AHControls ProportionalPlatform dimensionsLength x width 89 x 311 / 4 in2.26 m x 79.4 cmPlatform extension length 39 in 99 cmContinuous improvement of our products is a Genie policy.Product specifications are subject to change without notice or obligation.AC outlet in platform standardMaximum hydraulic pressure 3500 psi 241.3 bar(functions)System voltage 24VTires size 15 x 5 x 11 1 /4Airborne noise emissions <70 dBMaximum sound level at normal operating workstations(A-weighted)Maximum slope rating,stowed position 30% (17°)Maximum side slope rating,stowed position 30% (17°)Note: Slope rating is subject to ground conditions andadequate traction.Drive speedsStowed, maximum 2.2 mph 3.5 km/hPlatform raised, maximum 0.5 mph 0.8 km/h40 ft/54.5 sec 12.2 m/54.5 secFloor loading informationTire load, maximumANSI/CSA 1699 lbs 771 kgAUS 1768 lbs 802 kgTire contact pressureANSI/CSA 170 psi 11.95 kg/cm 21171 kPaAUS 177 psi 12.44 kg/cm 21219 kPaOccupied floor pressureANSI/CSA 221 psf 1079 kg/m210.59 kPaAUS 243 psf 1191 kg/m211.68 kPaNote: Floor loading information is approximate anddoes not incorporate different option configurations.It should be used only with adequate safety factors.

/ 37

Related manuals for Genie GS-2632