Genie GS-2632 Operators Manual With Maintenance Information

Also see for GS-2632: Operator's manual Service and repair manual Operator's manual Operator's manual Maintenance manual

Contents

Genie GS-2632 Operators Manual With Maintenance Information Manual pdf 37 page image

Operator's ManualFourth Edition • Third PrintingPart No. 1000033 GS-2032 • GS-2632 35SPECIFICATIONSModel GS-2632Height, working maximum 32 ft 9.9 mHeight, platform maximum 26 ft 7.9 mHeight, stowed maximum 84 3 / 4 in 2.15 mHeight, stowed maximum 75 1 / 4 in 1.91 mRails foldedPlatform height, 45 1 / 2 in 1.16 mStowed maximumHeight, guard rails - 39 in 99.1 cmANSI, CSA and AustraliaWidth 32 in 81.3 cmLength, stowed 96 1/ 4 in 2.44 mLength, platform extended 131 1 / 4 in 3.33 mMaximum load capacity 500 lbs 227 kgMaximum wind speedIndoor only (AUS) 0 mph 0 m/sOutdoor (ANSI) 28 mph 12.5 m/sWheelbase 73 in 1.85 mTurning radius (outside) 83 1 / 2 in 2.12 mTurning radius (inside) 0 in 0 cmGround clearance 31 / 2 in 8.9 cmGround clearance 3 / 4 in 1.9 cmPothole guards deployedWeight See Serial Label(Machine weights vary with option configurations)Power source 4 Batteries, 6V 225AHControls ProportionalPlatform dimensionsLength x width 89 in x 31 1 /4 in2.26 m x 79.4 cmPlatform extension length 39 in 99 cmContinuous improvement of our products is a Genie policy.Product specifications are subject to change without notice or obligation.AC outlet in platform standardMaximum hydraulic pressure 3500 psi 241.3 bar(functions)System voltage 24VTires size 15 x 5 x 11 1/ 4Airborne noise emissions <70 dBMaximum sound level at normal operating workstations(A-weighted)Maximum slope rating,stowed position 30% (17°)Maximum side slope rating,stowed position 30% (17°)Note: Slope rating is subject to ground conditions andadequate traction.Drive speedsStowed, maximum 2.2 mph 3.5 km/hPlatform raised, maximum 0.5 mph 0.8 km/h40 ft/54.5 sec 12.2 m/54.5 secFloor loading informationTire load, maximumANSI/CSA 1773 lbs 804 kgAUS 1830 lbs 830 kgTire contact pressureANSI/CSA 177 psi 12.48 kg/cm 21223 kPAAUS 182 psi 12.87 kg/cm21262 kPAOccupied floor pressureANSI/CSA 248 psf 1212 kg/m211.89 kPAAUS 243 psf 1187 kg/m211.65 kPANote: Floor loading information is approximate anddoes not incorporate different optionconfigurations. It should be used only withadequate safety factors.

/ 37

Related manuals for Genie GS-2632