Genie GS-2668 RT Operators Manual With Maintenance Information

Also see for GS-2668 RT: Specifications Service manual Operator's manual Operators manual with maintenance information Operator's manual

Contents

Genie GS-2668 RT Operators Manual With Maintenance Information Manual pdf 27 page image

Part No. 82233 Genie GS-2668 RT & Genie GS-3268 RT 25Operator's ManualSecond Edition · Third PrintingTransport InstructionsObserve and Obey:Common sense and planning must be applied tocontrol the movement of the machine whenlifting it with a crane.The transport vehicle must be parked on a levelsurface.The transport vehicle must be secured toprevent rolling while the machine is beingloaded.Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. See the serial plate for themachine weight.The machine must be on a level surface orsecured before releasing brakes.Securing to Truck or Trailer forTransitAlways chock the machine wheels in preparationfor transport.Use the tie-down points on the chassis foranchoring down to the transport surface.Use chains or straps of ample load capacity.Turn the key switch to the off position and removethe key before transporting.Inspect the entire machine for loose or unsecureditems.Brake Release Operation1 Chock the wheels to prevent the machine fromrolling.2 Be sure the winch line is properly secured to thedrive chassis tie points and the path is clear ofall obstructions.3 Turn the brake release knob counterclockwiseto open the brake valve.4 Pump the brake release pump knob.After the machine is loaded:1 Chock the wheels to prevent machine fromrolling.2 Turn the brake release knob clockwise to resetthe brakes.Towing the Genie GS-2668 RT or theGS-3268 RT is not recommended. If the machinemust be towed, do not exceed 2 mph / 3.2 km/h.