2 Genie GS-2668 RT & Genie GS-3268 RT Part No. 82233Operator's Manual Second Edition · Third PrintingSAFETY RULESElectrocution HazardsThis machine is not electrically insulated and willnot provide protection from contact with orproximity to electrical current.Maintain safe distances from electrical power linesand apparatus in accordance with applicablegovernmental regulations and the following chart.Voltage Minimum SafePhase to Phase Approach DistanceFeet Meters0 to 300V Avoid Contact300V to 50KV 10 3.0550KV to 200KV 15 4.60200KV to 350KV 20 6.10350KV to 500KV 25 7.62500KV to 750KV 35 10.67750KV to 1000KV 45 13.72Allow for platform movement, electrical line swayor sag and beware of strong or gusty winds.Keep away from the machine if it contactsenergized power lines. Personnel on the groundor in the platform must not touch or operate themachine until energized power lines are shut off.Do not operate the machine during lightning orstorms.Do not use the machine as a ground for welding.Tip-over HazardsOccupants, equipment and materials shall notexceed the maximum platform capacity or themaximum capacity of the platform extension.Maximum capacity - GS-2668RTPlatform retracted 1250 lbs 567 kgPlatform extended - Platform only 950 lbs 431 kgPlatform extended - Extension only 300 lbs 136 kgMaximum occupants - ANSI and CSA 4Maximum occupants - CEOutdoor use 4Indoor use only 4Maximum capacity - GS-3268RTPlatform retracted 1000 lbs 454 kgPlatform extended - Platform only 700 lbs 318 kgPlatform extended - Extension only 300 lbs 136 kgMaximum occupants - ANSI and CSA 4Maximum occupants - CEOutdoor use 2Indoor use only 41250 lbs / 567 kg Platform only950 lbs / 431 kgExtension only300 lbs / 136 kg1000 lbs / 454 kg Platform only700 lbs / 318 kgExtension only300 lbs / 136 kg