Genie GSMSOC Series User Manual
                 | |
Contents
|
CHAPTER 3 ADVANCED SETTINGS 19CHAPTER 3 ADVANCED SETTINGS183.2 CONTROLLING THE OUTPUT BY CALLINGIf the master user calls the GSM power socket, the socket output will beswitched on / off automatically when the user hears the ring tone in thephone. The call will end automatically if the user doesn’t hang up the call.By default this function is de-activated, first the function needs to be enabled.To enable this function please send the following SMS command: #18#1#To disable this function the master user sends the following SMScommand: #18#0#Successful SMS replyControl the socket power output status by calling de-activatedControl the socket power output status by calling activated3.3 CONTROLLING THE OUTPUT BY A TIME DELAYThe GSM power socket can be set by SMS command so there is a delay inturning on or turning off the output of the socketNOTE: When the ‘Delayed output function’ is applied the pre-set “timedswitching of the socket output” function will be overridden. When anyfunctions of the socket are over-ridden (i.e. if the socket output is delayed toturn off after 10 minutes and then you send an SMS command to turn thesocket off after 2 minutes the ‘delayed output function’ will be cancelled.This is the same if you set the power socket output to turn on at 9am andturn off at 5pm Monday to Friday and the send an SMS to turn the powersocket off at 3pm (or by pressing the M button to turn the socket off). Toreset these functions they need to be turned on again i.e. by sending#128#1# again (the formula does not need to be re-entered). Sending anSMS command also cancels the ‘temperature range function’ in the sameway as the other examples.To delay the output switching ON after a set number of minutes themaster user sends the following SMS command: #138#1#Minutes#To delay the output switching OFF after a set number of minutes themaster user sends the following SMS command: #138#0#Minutes#Minutes are time parameters, its range is 0-720. If the minutes are set to 0,the function will be invalid and the current output status of the socket won’tbe changed.3.1 DEFINING THE USERS3.1.1 CHANGING THE MASTER NUMBERTo change the master number please send the following SMS commandto the socket: #14#NewMasterNumber#3.1.2 ADDING AN ADDITIONAL USER / NUMBERUp to 4 additional user’s / number’s can control this socket. Additionalusers have the authority to turn the socket’s output on / off.To add additional users the master must send the following SMScommand: #06#AdditionalNumber#To add several users at the same time the master must send the followingSMS command: #06#AdditionalNumber1#…#AdditionalNumber4#*The number required is the additional user’s mobile number.Successful SMS reply#......# The additional number has been set successfully3.1.3 CHECKING ADDITIONAL USER’S / NUMBER’SRefer to Chapter 3.7 Check status.3.1.4 DELETING AN ADDITIONAL USER / NUMBERTo delete an additional user / number please send the following SMScommand to the socket: #113#AdditionalNumber#To delete several additional users / numbers please send the followingSMS command to the socket:#113#AdditionalNumber1#…#AdditionalNumber4#To delete all users / additional numbers please send the following SMScommand to the socket: #113#Successful SMS reply#......# Additional numbers have been deleted.Failed SMS reply#......# The additional number does not exist. |
Related manuals for Genie GSMSOC Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine