Genie PowerMax 1200 Operation & Maintenance Manual

Also see for CB 1000: Programming, operation & maintenance manual Maintenance manual Operation & maintenance manual Operation & maintenance manual

Genie PowerMax 1200 Operation & Maintenance Manual Manual pdf 14 page image

INTELLICODE 1 REMOTESRemotes provided with this unit can operate other (Intellicode® 1)models of Genie® garage door openers .The default Intellicode® 2 settingmust be changed to Intellicode® 1. (Follow these same steps to changeIntellicode® 1 back to Intellicode® 2.)NOTE: The button directly above the logo on the transmitter is presetto Intellicode® 1.The LED color displayed on the Remote indicates the Intellicode® mode:Red = Intellicode® 1 Green = Intellicode® 2***Repeat Step 2 to turn the RED LED on the Remote back to GREENfor operation with Intellicode® 2 openers.Once the LED on the Remote turns RED when the button is pressed,that button is programmed to the Intellicode® 1.If your door opener has a black antenna wire and the serial numberdoes not start with 10 or higher, the Learn Code Button andIndicator LED are located near the antenna. The light lens may need tobe opened. If you use an external receiver, it may need to be openedto access the Learn Code Button and Indicator LED.If you have questions, see your Genie® instructions for this Intellicode® 1model of opener.NOTE: Choose the Genie® Remote using Intellicode® 1 button for thisactivity. All new Remotes have the button directly above the logopreset to Intellicode® 1.This button is set to Intellicode® 1.Optional Programming41 Select a Remote button NOT already programmed tothe Powerhead. Press and hold the button for 10 seconds(both the RED and GREEN LEDs on the Remote turn ON).2 Press and release the Remote button 3 times.3 Find the Learn Code Button and Learn Code Indicator LEDon your older Genie® door opener.4 Press the Learn Code Button (the LED on the Opener5 Press the Remote button 2 times (the LED on the Openerturns OFF).6 Press the Remote button again. If the door moves, theRemote button is programmed to your opener.14®