Genie S-40 Trax Operator's Manual

Also see for S-40 TRAX: Maintenance manual Maintenance manual Maintenance manual Operator's manual Service manual

Contents

Genie S-40 Trax Operator's Manual Manual pdf 46 page image

Operator's Manual First Edition • Third PrintingOperating Instructions44 S-40 TRAX • S-45 TRAX Part No. 217555Emergency StopPush in the red Emergency Stop button to the offposition at the ground controls or the platformcontrols to stop all machine functions and turn theengine off.Repair any function that operates when either redEmergency Stop button is pushed in.Selecting and operating the ground controls willoverride the platform red Emergency Stop button.Emergency ControlsUse emergency power if the primary power source(engine) fails.1 Turn the key switch to ground or platformcontrol.2 Pull out the red Emergency Stop button to theon position.3 Press down the foot switch when using thecontrols from the platform.4 Simultaneously hold the emergencypower switch on and activate thedesired function.ORThe drive function will not operate with emergencypower.Operation from Ground1 Turn the key switch to ground control.2 Pull out the red Emergency Stop button to theon position.3 Gasoline/LPG models: Choose fuel by movingthe fuel select switch to the desired position.4 Start the engine.To Position Platform1 Push and hold the functionenable button.ORHold the function enableswitch to either side.2 Move the appropriate toggle switch accordingto the markings on the control panel.Drive and steer functions are not available from theground controls.