Operator's Manual Second Edition • First PrintingWork Area Safety16 S-60X Part No. 1261735Fall HazardsOccupants must wear asafety belt or harness inaccordance withgovernmental regulations.Attach the lanyard to theanchor provided in theplatform.Do not sit, stand or climbon the platform guardrails. Maintain a firmfooting on the platformfloor at all times.Do not climb down fromthe platform when raised.Keep the platform floor clear of debris.Lower the platform entry mid-rail or close the entrygate before operating.Do not enter or exit the platform unless themachine is in the stowed position and the platformis at ground level.Collision HazardsBe aware of limited sightdistance and blind spotswhen driving or operating.Be aware of the boom position and tailswing whenrotating the turntable.Check the work area foroverhead obstructions orother possible hazards.Be aware of crushinghazards when graspingthe platform guard rail.Operators must comply with employer, job site andgovernmental rules regarding use of personalprotective equipment.