Second Edition • First Printing Operator's ManualSpecificationsPart No. 1261735 S-60X 65SpecificationsModel S-60XHeight, working maximum 64 ft 4 in 19.79 mHeight, platform maximum 58 ft 4 in 17.79 mHeight, stowed maximum 8 ft 11 in 2.72 mHorizontal reach, maximum 50 ft 10 in 15.5 mHorizontal reach, restricted 40 ft 8 in 12.4 mWidth 8 ft 6 in 2.59 mLength, stowed 27 ft 11 in 8.5 mMaximum platform capacity,unrestricted range of motion500 lbs 227 kgMaximum load capacity,restricted range of motion1000 lbs 454 kgMaximum wind speed 28 mph 12.5 m/sWheelbase 8 ft 2.5 in 2.5 mTurning radius (outside) 22.3 ft 6.8 mTurning radius (inside) 12 ft 3.66 mTurntable rotation (degrees) ContinuousTurntable tailswing 4 ft 1.22 mControls 12V DC proportionalPlatform dimensions, 6 foot(length x width)72 x 30 in 182 x 76 cmPlatform dimensions, 8 foot(length x width)96 x 36 in 244 x 91 cmPlatform leveling self-levelingPlatform rotation 160°AC outlet in platform standardGround clearance, center 14.5 in 36.8 cmGround clearance, axle 13 in 33 cmFuel tank capacity, gasoline 30 gallons 114 litersFuel tank capacity, diesel 35 gallons 132 litersHydraulic pressure, maximum(boom functions)3000 psi 207 barSystem voltage 12VWeight 20,742 lbs 9408 kg(Machine weights vary with option configurations. Seeserial label for specific machine weight.)Maximum slope rating, stowed position, 2WDCounterweight uphill 30% 17°Counterweight downhill 10% 6°Side slope 25% 14°Maximum slope rating, stowed position, 4WDCounterweight uphill 45% 24°Counterweight downhill 30% 17°Side slope 25% 14°Note: Slope rating is subject to ground conditions andadequate traction.Drive speedsDrive speed, stowed, 2WD 4.0 mph40 ft/6.2 sec6.4 km/h12.2m/6.2 secDrive speed, stowed, 4WD 3.0 mph40 ft/7.2 sec4.8 km/h12.2m/7.2 secDrive speed, raised orextended – all models0.7 mph40 ft/40 sec1.1 km/h12.2 m/40 secFloor loading informationTrack load maximum 11,640 lbs 5280 kgTrack contact pressure 70 psi 4.92 kg / cm2483 kPaOccupied floor pressure 234 psf 1140 kg / m211.195 kPaNote: Floor loading information is approximate and doesnot incorporate different option configurations. It shouldbe used only with adequate safety factors.Continuous improvement of our products is a Geniepolicy. Product specifications are subject to changewithout notice or obligation.