Genie S-85 Operator's Manual

Also see for S-85: Maintenance manual Maintenance manual Maintenance manual Operator's manual Operator's manual

Contents

Seventh Edition • Third Printing Operator's ManualControlsPart No. T107108 S-85 2511 Dual axis proportional control handle for driveand steer functionsOR Proportional control handle for drivefunction and thumb rocker for steer function.Move the control handle in the directionindicated by the blue arrow on the controlpanel and the machine will drive forward.Move the control handle in the directionindicated by the yellow arrow and the machinewill drive backwards. Move the control handlein the direction indicated by the blue triangleand the machine will steer to the left. Move thecontrol handle in the direction indicated by theyellow triangle and the machine will steer tothe right.ORMove the control handle in the directionindicated by the blue arrow on the controlpanel and the machine will drive forward.Move the control handle in the directionindicated by the yellow arrow and the machinewill drive backwards. Press the left side of thethumb rocker and the machine will steer to theleft. Press the right side of the thumb rockerand the machine will steer to the right.12 Drive enable switchTo drive when the drive enable light is on, holdthe drive enable switch to either side andslowly move the drive control handle off center.Be aware that the machine may move in theopposite direction that the drive and steercontrols are moved.13 Drive enable indicator lightLight on indicates that the boom has movedjust past either non-steer wheel and drivefunction has been interrupted.14 Glow plug switch (if equipped)Move the glow plug switch to either side andhold for 3 to 5 seconds.15 Engine idle (rpm) select switchMove the engine idle select switch to the turtleposition for foot switch activated low idle.Move the engine idle select switch to the rabbitposition for foot switch activated high idle.16 Models with LCD screen: Engine shut-downindicator lightLight on indicates that the engine has shutdown. Contact service personnel.17 Gasoline/LPG models: Fuel select switchMove the fuel select switch to the gasolineposition to select gasoline. Move the fuelselect switch to the LPG position to selectLPG.18 Engine start switchMove the engine start switch to either side tostart the engine.19 Machine malfunction indicator lightLight on indicates all functions have stopped.See the instructions in the OperatingInstructions section.