Genie SILENTMAX 1000 3042 Operation And Maintenance Manual

Contents

Genie SILENTMAX 1000 3042 Operation And Maintenance Manual Manual pdf 20 page image

20Independent Light Control ButtonControls door opener lights from inside garageSure-Lock™ Button– LOCK disables controlsafter door is completelyclosed– UNLOCK allows controls towork normallyIndicator LightRed indicator light is always ONWhen Sure-Lock™ is ON theindicator light flashesOpen/Close ButtonOpen and closes door from inside garageWALL CONSOLE - OVERVIEWUse only the Series III wall console provided with thisunit.Wall console has three buttons and one indicator light.Indicator LightIndicator light will display Red when wall console isproperly wired and Sure-Lock™ is OFF. When Sure-Lock™ is ON indicator light flashes.Open/Close ButtonUse this button to open or close garage door. WhenSure-Lock™ is ON the Open/Close button will CLOSEdoor only. Note: Constant button pressure in theCLOSE mode will override error responses in thepowerhead and close door.Independent Light Control ButtonUse this button to turn powerhead lights ON.Powerhead lighting will remain ON until this buttonis pressed again or a door action has been completed.Note: If opener has a Motion Detector sensor thesensor will keep powerhead lights ON as long asmotion is detected.Sure-Lock™ ButtonWhen Sure-Lock™ is ON the powerhead cannot beactivated by the wall console or a remote.• Press and hold for 5 seconds (or until IndicatorLight flashes) to activate Sure-Lock™.• Press and release to turn Sure-Lock™ OFF.OPTIONAL DUAL WALL CONSOLE - INSTALLATIONUse only a Series III wall console when adding asecond wall console. The optional second Genie®Series III wall console must be purchased separately.ORSTB BWC IWCNOTUSED NOTUSEDFROM STBs FROM WALLCONSOLE #1FROM WALLCONSOLE #2TOPOWERHEADWALLCONSOLE #1WALLCONSOLE #2TO WALL CONSOLE #1WB/W WB/WWB/W WB/WBOTH TO POWERHEADWALLCONSOLE #1WALLCONSOLE #2STB BWC IWCNOTUSED NOTUSEDNOTUSED NOTUSEDFROM STBsFROM WALLCONSOLETip: If indicator light on wall console comes ON, butthere is NOoperation frombuttons - verifywall consolewire routingat powerheadconnector.STB BWC IWCNOTUSED NOTUSEDNOTUSED NOTUSEDFROM STBsFROM WALLCONSOLESTB BWC IWCFROM STBsFROM WALLCONSOLESTB BWC IWCROM WAOM WOLESOWire connectoron PowerheadWire connector onPowerheadThis opener has a Serial Number sticker in which the serialnumbers begin with 10 or higher.Follow the instructions on this page.ATTENTIONIf your garage door opener has a Serial Number sticker whichlooks like this, in which the first two numbers are 10 or higher,your opener will operate using this Series III wall control.MODEL AC SR3 THE GENIE COMPANYFCC ID: B8Q AC SR3 Residential Door OperatorIC: 2133A-CSD1D 120V. 60HZ. 5AFOR HE P C L 1 800 35GENIE OR WWW GEN ECOMPANY COMS/N:10XXXX XXXXXXXWall consoles from other manufacturers may not work withopeners of these serial number groups. Genie® Series I wallbuttons and Series II wall consoles will not work with openersof this serial number group.©2011 The Genie Company 3/2011