Genie SILENTMAX 1000 3042 Operation And Maintenance Manual

Contents

Genie SILENTMAX 1000 3042 Operation And Maintenance Manual Manual pdf 21 page image

CHAIN OR BELT - TENSION ADJUSTMENTWARNING• Observe all safety warning and precautions!• Disconnect power from opener and disconnectcarriage in rail from bullet before beginning thistask.Visually inspect the belt every 6 months.NOTE: Tension adjustments should be made with thedoor in the down position and the carriage released.• At the center of the rail the belt shouldnot be resting on the rail. See adjustmentillustration on right.– With the bullet NOT engaged to the carriage,tighten adjustment nut until belt does not,at the center of the rail, rest on rail. Do NOTovertighten.• Ars there frayed edges on belt?– Contact a trained door system technician forbelt replacement.• Are there kinks or twists in the belt?– Contact a trained door system technician forbelt replacement.Tighten nut to increasetension on beltBeltBeltBelt at center of railApprox. 1/8"Adjustment requiredCorrectly adjusted21REMOTE BATTERY REPLACEMENTReplace remote battery with a CR 2032 coin cell battery.1. Open the remote case using a washer or coin that fitsinto the slot at the top of the remote.2. Replace battery.3. Align components and snap case closed.©2011 The Genie Company 3/2011