Genie Superlift SL-5 Parts & Service Manual

Contents

Genie Superlift SL-5 Parts & Service Manual Manual pdf 15 page image

4 - 2 Genie Superlift Part No. 32283Parts and Service Manual - First EditionSection 4 - Scheduled Maintenance ProceduresA-1Inspect the Operator's ManualMaintaining the operator's manual in good conditionis essential to safe machine operation. Theoperator's manual is included with each machineand should be stored in the box provided on themast. An illegible or missing manual will not providesafety and operational information necessary for asafe operating condition.1 Check to make sure the operator's manual ispresent and complete in the storage containeron the mast.2 Examine the pages of the manual to be surethat they are legible and in good condition.3 Always return the manual to the storagecontainer after use.Contact your authorized Geniedistributor or Genie Industries if areplacement manual is needed.A-2Inspect the Decals and PlacardsMaintaining all of the safety and instructionaldecals and placards in good condition is essentialfor safe machine operation. Decals alert operatorsand personnel to the many possible hazardsassociated with using this machine. They alsoprovide users with operation and maintenanceinformation. An illegible decal will fail to alertpersonnel of a procedure or hazard and could resultin unsafe operating conditions.1 Refer to the decals section in the operator'smanual and use the decal list and illustration todetermine that all decals and placards are inplace.Table A Procedures2 Inspect all decals for legibility and damage.Replace any damaged or illegible decalimmediately.Contact your authorized Geniedistributor or Genie Industries ifreplacement decals are needed.A-3Inspect for Damage , Loose orMissing PartsDaily machine condition inspections are essentialto safe machine operation and good machineperformance. Failure to locate and repair damage,and discover loose or missing parts may result inan unsafe operating condition.1 Inspect the entire machine for damage andimproperly installed or missing parts including:· cable anchor· cable and pulleys· mast columns· exterior plastic shims for safety brake· nuts, bolts and other fasteners· load handling attachment· winch and related components· legs and casters· stabilizers, latch plates and casters· loading wheels and snap pin· dents or damage to machine· cracks in welds or structural components· corrosion to painted surfaces· corrosion or oxidation to all other surfaces