Genie TZ-50 Operator's Manual

Also see for TZ-50: Operator's manual Service manual Servise manual Operator's manual

Contents

Genie TZ-50 Operator's Manual Manual pdf 42 page image

40 Genie TZ-50 Part No. 133555Operator’s Manual Third Edition • Third PrintingTransport and Lifting InstructionsObserve and Obey:Genie provides this securement informationas a recommendation. Drivers are solelyresponsible for making sure machines areproperly secured and the correct trailer isselected pursuant to US Department ofTransportation regulations, other localizedregulations, and their company policy.The transport vehicle must be parked on a levelsurface.The transport vehicle must be secured toprevent rolling while the machine is beingloaded.Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. See the serial plate for themachine weight.Securing to Truck or Trailer forTransitFully lower and retract the boom. Make sure theboom and mid-pivot rest securely in the mastcradles.Securely latch the boom hold-down latches.Raise all four outriggers to the stowed position.Always chock the machine wheels in preparationfor transport.Turn the key switch to the off position and removethe key before transporting.Inspect the entire machine for loose or unsecureditems.Securing the ChassisPlace a block under the tongue.Secure a strap over the tongue of the machine.Place a block underneath the axle between thetwo wheels.Use the four tie-down points on the chassis foranchoring down to the transport surface.Use chains or straps of ample load capacity.Use a minimum of 4 chains to secure the chassis.Adjust the rigging to prevent damage to the chains.Truck bed