Genie TZ-50 Operator's Manual

Also see for TZ-50: Operator's manual Service manual Servise manual Operator's manual

Contents

Genie TZ-50 Operator's Manual Manual pdf 8 page image

6 Genie TZ-50 Part No. 133555Operator’s Manual Third Edition • Third PrintingGeneral Safety97551 AImproper contactwith componentsunder any coverwill cause seriousinjury.Only trained maintenance personnelshould access compartments. Accessby operator is only advised whenperforming Pre-operation Inspection.Allcompartments must remain closed andsecured during operation.Compartment access is restricted.CAUTIONThe operator is responsible for safe machineoperation.This includes:1 Avoid hazardous situations.2 Always perform a pre-operation inspection.3 Always perform function tests prior to use.4 Inspect the work place.5 Only use the machine as it was intended.Do not operate unless:You read, understand and obey:- manufacturer’s instructions and safety rules -safety and operator's manuals and decals- employer’s safety rules- applicable governmental regulationsYou are properly trained to safely operate thismachine.DANGER82479 BFailure to read, understand andobey the operator's manualand safety rules will result indeath or serious injury.82505 ACrushing Hazard.Contact with movingparts will cause deathor serious injury.Keep clear of elevatedcomponents.8255812631404626243617975518250582479Manifold Side / Platform End TZ-50TZ5006-1234STOPSTOP462624361782558975511263140824798250582558 BInjection HazardEscaping fluid under pressure canpenetrate skin, causing serious injury.Relieve pressure before disconnectinghydraulic lines. Keep away from leaksand pin holes. Use a piece of cardboardor paper to search for leaks. Do not usehand.Fluid injected into skin must besurgically removed within a few hoursby a doctor familiar with this type ofinjury or gangrene will result.WARNINGElectrocution HazardDeath or injury can result from contacting electricpower lines.Always contact the electric power line owner. Theelectric power shall be disconnected or the power linesmoved or insulated before machine operations begin.1263140 ADANGERMaintain required clearance.Line Voltage Required Clearance0 to 300V Avoid Contact300V to 50KV 10 ft 3.05 m50KV to 200KV 15 ft 4.60 m200KV to 350KV 20 ft 6.10 m350KV to 500KV 25 ft 7.62 m500KV to 750KV 35 ft 10.67 m750KV to 1000KV 45 ft 13.72 mover 1000 KV see operator manual