Part No. 139378 Z-30/20N • Z-30/20N RJ • Z-34/22 • Z-34/22N 3 - 7Section 3 • Scheduled Maintenance ProceduresJune 2011REV AA-2Perform Pre-operationInspectionNote: Genie specifications require that thisprocedure be performed daily or every 8 hours,whichever comes first.Completing a pre-operation inspection is essentialto safe machine operation. The pre-operationinspection is a visual inspection performed by theoperator prior to each work shift. The inspection isdesigned to discover if anything is apparentlywrong with a machine before the operator performsthe function tests. The pre-operation inspectionalso serves to determine if routine maintenanceprocedures are required.Complete information to perform this procedure isavailable in the Operator's Manual located on yourmachine.CHECKLIST A PROCEDURESA-3Perform Function TestsNote: Genie specifications require that thisprocedure be performed daily or every 8 hours,whichever comes first.Completing the function tests is essential to safemachine operation. Function tests are designed todiscover any malfunctions before the machine isput into service. A malfunctioning machine mustnever be used. If malfunctions are discovered, themachine must be tagged and removed fromservice.Complete information to perform this procedure isavailable in the Operator's Manual located on yourmachine.
