More Programs 6-15Taking Pictures1. Start the Getac Camera program. You will be in Camera Mode.2. For camera controls such as brightness and zooming, tap Menu.3. Aim the camera lens at the subject. Press the key halfway down forautomatic focusing. A white frame appears. Wait until the color of theframe turns green indicating the subject is in focus.4. Press the key fully or tap and hold the Live Image area to take thepicture.5. The message appears on the screen for a few seconds, meaningthe picture is saved to the predefined storage location.NOTE: Always wait for the saving procedure to complete before giving thenext command. An untimely command can be lost, especially in Burst mode.6. The result shows in the Instant Image area below. You can tap the areatwice to switch to Brower Mode for the full view. (See “Browser Mode”later for more information.)Camera Mode SettingsTo change camera settings, tap Menu while inCamera Mode.Tap the down arrow of the item you want toadjust. In the pull-down menu, tap your choice.When finished, tap Back and then Yes.All changes (except for Mode) remain effectiveuntil you change them again.* The above screen shows thedefault settings.
