44 Graphics SetupGraphics SetupGraphics SetupGraphics SetupDVMTDVMTDVMTDVMT PrePrePrePre----AllocatedAllocatedAllocatedAllocated sets the amount of pre-allocated (fixed) graphics memoryfor use by the internal graphics device. Device Configuration enables or disables several hardware components. Theitems available for setting depend on your model. Screen Tapping for Boot Options sets if tapping the screen during startup willinvoke the boot options menu which provides access to some pre-boot operations.If disabled, tapping the screen during startup has no effect to the system’s bootingprocess.SecuritySecuritySecuritySecurity MenuMenuMenuMenuThe Security menu contains the security settings, which safeguard your system againstunauthorized use.NOTE: You can set the user password only when the supervisorpassword has been set. If both the supervisor and user passwords are set, you canenter any of them for starting up the system and/or enteringBIOS Setup. However, the user password only allows you toview/change the settings of certain items. A password setting is applied right after it is confirmed.To cancel a password, leave the password empty by pressingthe Enter key. SetSetSetSet Supervisor/UserSupervisor/UserSupervisor/UserSupervisor/User PasswordPasswordPasswordPassword sets the supervisor/user password. You can setthe supervisor/user password to be required for starting up the system and/orentering BIOS Setup. Power onPower onPower onPower on PasswordPasswordPasswordPassword allows you to enable or disable the entering of passwordfor booting up your system. Secure Boot ConfigurationSecure Boot ConfigurationSecure Boot ConfigurationSecure Boot Configuration (This item appears only when the password has beenset.)