83On the Use ofOn the Use ofOn the Use ofOn the Use of thethethethe RF DeviceRF DeviceRF DeviceRF DeviceUSA and Canada Safety Requirements and NoticesUSA and Canada Safety Requirements and NoticesUSA and Canada Safety Requirements and NoticesUSA and Canada Safety Requirements and NoticesRadio FrequencyRadio FrequencyRadio FrequencyRadio Frequency Interference Requirements and SARInterference Requirements and SARInterference Requirements and SARInterference Requirements and SARThis device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposureto radio frequency (RF) energy set by the Federal Communications Commission ofthe U.S. Government.This device complies with FCC radiation exposure limits set forth for an uncontrolledenvironment.This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.Operations in the 5.15-5.25GHz band are restricted to indoor usage only.EMC RequirementsThis device uses, generates and radiates radio frequency energy. The radio frequencyenergy produced by this device is well below the maximum exposure allowed bythe Federal Communications Commission (FCC).This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference thatmay cause undesired operation.The FCC limits are designed to provide reasonable protection against harmfulinterference when the equipment is installed and used in accordance with theinstruction manual and operated in a commercial environment. However, there is