1. Make sure the computer is turned off.2. Plug the DC cord of the AC adapter to the power connector on thecomputer.NOTE: When the computer is attached to the docking station, connect the DC cord tothe power connector on the docking station instead.3. Plug the female end of the AC power cord to the AC adapter and themale end to an electrical outlet.4. When the AC adapter is connected, the indicator on the computer /docking station lights up, indicating that power is being supplied fromthe electrical outlet to the AC adapter and onto your computer /docking station. Now, you are ready to turn on the computer.CAUTION:z When you disconnect the AC adapter, disconnect from the electrical outlet first andthen from the computer / docking station. A reverse procedure may damage theAC adapter or the computer / docking station.z When unplugging the connector, always hold the plug head. Never pull on thecord.NOTE: When the AC adapter is connected, it also charges the battery pack. Forinformation on using battery power, see Chapter 3.Opening the CoverCAUTION: Be gentle when opening and closing the cover. Opening it vigorously orslamming it shut could damage the computer.Open the top cover by pulling the cover latch (bottom part)outward using your thumb and at the same time using your indexfinger to press on the notch on the top portion, and lifting up thecover. You can tilt the cover forward or backward for optimalviewing clarity.Getting Started 1-3
