Attaching and Detaching the Computer To/From theDocking StationWARNING: Make sure that the computer is off before connecting it to ordisconnecting it from the docking station to prevent damage to either computer ordocking station.Attaching the Docking StationTo attach the computer to the docking station:1. Place the docking station on an upright position with the floppy andCD drives in front facing you.Slowly place the computer on top of the docking station slightlyinclined toward the front and carefully align the small rectangular holeslocated in front near the edge of the computer to the two small hooks,also located in the front top edge of the docking station to connecttogether.Press on the back portion to connect the computer to the dockingstation.Detaching the ComputerTo detach the computer from the docking station:2. Place both index and middle fingers firmly on the side locking latchand press firmly while at the same time using both thumbs to pull upthe rear side of the computer.3. Slide the computer slightly toward the rear to separate the smallrectangular holes located in front near the edge of the computerfrom the two small hooks, also located in the front top edge of thedocking station.4. Lift the computer away from the docking station.Getting Started 1-13
