6-14 Using Special Utilities4. If you have selected P1, P2, or P3 in the previous step, follow theprocedures as described in “Quick Button Definition Utility” later tocontinue with the settings.5. Repeat the steps for the other buttons that you want to re-define.6. For the changes to take effect immediately, click Start Flash. Thepercentage of flash process will be shown. Click OK when the completionmessage appears.7. If you intend to save the configurations for later retrieval, click SAVE.Select a location, enter a filename, and click Save to save the currentconfigurations as a .bfh file.To use any previously saved configurations, click Load to retrievethe .bfh file and click Start Flash for the configurations to take effect.NOTE: You can restore to the default settings by clicking Get Default.Quick Button Definition UtilityYou can have P1, P2, or P3 button to start a program or open a file.1. Follow steps 1 to 4 in the previous “Selecting from the AvailableOptions” section.2. Click Define P1~P3.3. The following window appears. Select the button you want to re-defineand click the Open button .
