Using BIOS Setup and System Recovery 5-5Advanced MenuThe Advanced menu contains the advanced settings.Information Main Advanced Security TPM State Boot ExitJapanese Keyboard:SATA ModeTotal Graphics Memory:Serial port COM1:Mode:Serial port COM1:Mode:Boot-time Diagnostic Screen:Turbo ModeIntel Trusted ExecutionIntel AMT Setup Prompt:Wake-On-LAN(WOL)2nd LAN and Expansion Slot:*Battery Charging Safety Scheme:[ ][AHCI][MaxDVMT][Enabled][RS232][Enabled][RS232][Disabled][Enabled][Disabled][Enabled][Enabled[Disabled][Disabled]Item Specific HelpForceEntryF1 Help ↑↓ Select Item -/+ Change Values F9 Setup DefaultsEsc Exit ←→ Select Menu Enter Select X Sub-Menu F10 Save and ExitJapanese Keyboard enables support for the Japanese keyboard.SATA Mode set toAHCI if your hard disk supports AHCI. AHCI allows you totake advantage of Advanced Host Controller Interface features. The optionsareIDE,AHCI , andRAID.CAUTION: Incorrect SATA mode settings can result in hard disk drive bootfailure.RAID Mode Selection This item appears only when the previous item isset toRAID. Press Enter to access the submenu for setting the RAID leveltoRAID0,RAID1, orRAID5.Total Graphics Memory sets the amount of total graphics memory(pre-allocated + fixed + DVMT) for use by the internal graphics device.Serial Port COM1/COM2 allows you to unconditionally disable it when set atDisabled.Disabled
