H.264 DVR User Manual
                                                                                                             | |
Contents
| 
Digital Video Recorder User Manual18Item Name Function3 REC Button To record manually4 Digital Button Input digital or choose camera5 Multi Screen Button To choose multi screen display mode6 SEARCH Button To enter search mode7 MENU Button To enter menu8 ENTER Button To confirm the choice or setup9 Direction Button Move cursor in setup or pan/title PTZ10 +/- Button To increase or decrease the value in setup11 Playback Control Button To control playback, Fast forward/rewind/stop/single frame play12 AUDIO Button To enable audio output in live mode13 Auto Dwell Button To enter auto dwell mode14 BACKUP Button To enter backup mode15 PTZ Control Button To control PTZ camera:Move camera/ZOOM/FOCUS/IRIS/SPEED controlOperation processes with remote controller to control multi-DVRThe device ID of the DVR is 0. When use of remote controller to control single DVR, it’s not necessarily to reset the device ID, user can do operationdirectly; when control multiple DVR with remote controller, please refer to below steps:Step1: Activate remote controller to control DVR: enable DVR: turn the IR sensor of the remote controller to the IR receiver that on the front panel,press the number key 8 twice, then input device ID (Range from: 0-65535; the default device ID is 0.) with other digital number: 0-9, after that, pressENTER button to confirm.Step2: User can check the device ID by enter into System configurationÆBasic configurationÆdevice ID. User also can set other DVRs with thesame device ID. For more convenient to operate, we don’t recommend user to set the device ID too long.Step3: Cancel controller to control DVR: turn the IR sensor of the remote controller to the IR receiver that on the front panel, press the number key 8twice, then input the device ID that needs to be cancelled from controlling, press ENTER button to confirm. After that, the DVR will not be controlledby remote controller.2.5 Control with Mouse2.5.1 Connect MouseIt supports USB mouse through the ports on the rear panel, please refer to Fig 2.9 Remote Controller.Notice: If mouse is not detected or doesn't work, check below steps:1. Make sure the mouse plugs in the USB mouse port not the USB port |
Related manuals for H.264 DVR
manualsdatabase
Your AI-powered manual search engine