Digital Video Recorder User Manual737 Remote Surveillance7.1 Accessing DVRIf making remote view, the DVR must connect with LAN or internet. Then enable network server in the unit. Please refer to 4.6 NetworkConfiguration.This unit supports IE browser, not any client software installed. In addition, it supports XP and Vista.7.1.1 On LANStep1: Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the DVR and router. Enter Menu—Information—Network,and user can check the network configuration of DVR.Step2: Enter Video to set network video parameters like resolution, frame rate etc.Step3: Open IE browser on a computer on the same LAN. Input the IP address of the DVR in IE address blank and enter.Step4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password.Step5: Input name and password correctly, and enter. It will show the picture as below.
