H3C MSR 30-20 ROUTER Installation Manual

Also see for H3C MSR 30-20 ROUTER: Command reference User manual User manual Supplementary guide Installation manual

Contents

3-6Figure 3-6 Power socket on DC-powered routers(1) (2)(1) Power switch (2) DC inputConnecting the DC power cordFigure 3-7 Sketch map of DC power cordTable 3-3 Connection of the DC power cord between the DC power supply and the router–48 VDC power supply RouterX2 (–48 VDC connector, blue) X1.A1X3 (BGND connector, black) X1.A3Step 1: Make sure that the PGND is properly grounded to the earth.Step 2: Insert one end of the DC power cord accompanying the router into the power socket on thechassis rear panel. Then connect the other end of the power cord (with a BGND connector and a –48VDC connector) to a –48 VDC power supply.When connecting the DC power cord, notice the labels on the power cord to avoid wrong connection.Step 3: Check the POWER LED on the front panel of the router. ON indicates correct connection.