41* ** BootWare, Version 1.00 ** *****************************************************************************Compiled Date : Jul 1 2010CPU Type : XLS408CPU L1 Cache : 32KBCPU Clock Speed : 1000MHzMemory Type : DDR2 SDRAMMemory Size : 1024MBMemory Speed : 533MHzBootWare Size : 508KBFlash Size : 128MBBASIC CPLD Version : 0.0EXTEND CPLD Version : 0.0PCB Version : Ver.ABootWare Validating...Press Ctrl+B to enter extended boot menu...Starting to get the main application file--flash:/ S10500.bin!.........................................................................................The main application file is self-decompressing...........................................................................................................Done!System application is starting...Starting to get the main application file--flash:/ S10500.bin!..........................................................................................The main application file is self-decompressing..........................................................................................................................................................................................Done!System application is starting...User interface aux0 is available.Press ENTER to get started.Press Enter at the prompt. When the prompt appears, you can configure the switch.After powering on the switch, check the following items:• The cooling system is working, and you can hear fan rotating noise and feel air being blown out.• The system status LEDs on the MPUs show that the system is operating normally. For moreinformation about LED behaviors, see "Appendix C LEDs."Configuring the switchBy default, the switch does not authenticate the console login user at an AUX interface. To increasesystem security and enable remote management:• Configure remote access services, for example, Telnet or SSH.
