77Table 31 40-Gigabit CFP module specifications40-Gigabit CFPmoduleCentralwavelength Connector Cable specifications Maximumtransmission distanceLSUM1CFP0 1310 nm LC 9/125 μm single-mode fiber 10 km (6.21 miles)Table 32 100-Gigabit CFP module specifications100-GigabitCFP moduleCentralwavelength Connector Cable specifications Maximumtransmission distanceCFP-100G-LR4-WDM1300• 1295.56 nm• 1300.05 nm• 1304.58 nm• 1309.14 nmLC 9/125 μm single-mode fiber 10 km (6.21 miles)DC power cableDC power cables are used for connecting the DC power modules of an S10500 switch to the external DCpower supply system.Table 33 DC power cable specificationsDC power cable Cable length Description0404A0E1 3 m (9.84 ft) Used on the LSUM1DC2400power module0404A0E2 15 m (49.21 ft)AC power cableAC power cables are used for connecting the power modules of an S10500 switch to the external ACpower supply system.• Select AC power cables according to the power of the power module.• The connector type varies by country or region. Select a compliant connector type as needed.• For the power module LSUM2AC2500 of the H3C S10500 Switch Series, select 16A AC powercables. For the connector types of different countries or regions, see Table 34.
