140Figure 78 Label for signal cables(2)10.084.01.50.62.01.0(1)11.011.07.5 7.0 5.55.55.55.57.07.537.0TO:(2)(1)(1) Dividing line (2) Cut dotted lineThe dividing lines on the label help to specify more clearly the position of a cable. For example, there isone between the cabinet number and the frame number and another one between the frame numberand the slot number. The dividing line is 1.5 × 0.6 mm (0.06 × 0.02 in) in size with the color ofPONTONE 656c (light blue).The cut dotted line helps to fold the label when you affix it to the cable, and its size is 1.0 × 2.0 mm (0.04× 0.08 in).There is a mark “TO:” (upside down in the figure) at the lower right corner of the label. The mark is usedto identify the opposite end of the cable on which the label is affixed.Label for power cordsThe label for power cords should be attached to the identification plate on the cable ties that are bundledto the cable. The identification plate has an embossment of 0.2 × 0.6 mm (0.008 × 0.02 in) around(symmetric on both sides), and the area in the middle is for affixing the label, as shown in Figure 79(expressed in mm):
