H3C S3100V2-52TP Installation Manual

Also see for S3100V2-52TP: Configuration guide Installation, quick start

Contents

21You can now configure the switch.NOTE:When the switch boots for the first time, it automatically obtains the configuration file through the DHCPserver. If it fails to obtain the configuration file, it boots with the default configuration.Changing the boot modeBy default, the system starts up in fast boot mode. To change the boot mode to normal, press Ctrl + Bwithin one second to enter the Boot ROM menu:BOOT MENU1. Download application file to flash2. Select application file to boot3. Display all files in flash4. Delete file from flash5. Modify BootRom password6. Enter BootRom upgrade menu7. Skip current system configuration8. Set BootRom password recovery9. Set switch startup mode0. RebootEnter your choice(0-9):Enter 9. The system prompts you to change the startup mode:The current mode is fast startup mode!Are you sure you want to change it to full startup mode? Yes or No(Y/N)Enter Y. The system displays the following information:Setting startup mode...done!BOOT MENU1. Download application file to flash2. Select application file to boot3. Display all files in flash4. Delete file from flash5. Modify BootRom password6. Enter BootRom upgrade menu7. Skip current system configuration8. Set BootRom password recovery9. Set switch startup mode0. RebootEnter your choice(0-9):Enter 0. The system reboots in normal startup mode and displays the following information:Starting......