H3C S3600-28P-SI Operation Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Operation manual

Contents

H3C S3600-28P-SI Operation Manual Manual pdf 7 page image

Operation Manual – Port Basic ConfigurationH3C S3600 Series Ethernet Switches-Release 1510 Chapter 1 Port Basic Configuration1-6Table 1-5 Enable flow control on a portOperation Command RemarksEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —Enable flow control on theEthernet port flow-control By default, flow control isnot enabled on the port.1.2.4 Configuring Access Port AttributeTable 1-6 Configure access port attributeOperation Command RemarksEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —Set the link type of theport to access port link-type accessOptionalBy default, the link type ofa port is access.Add the current accessport to a specified VLAN port access vlan vlan-id Optional1.2.5 Configuring Hybrid Port AttributeTable 1-7 Configure hybrid port attributeOperation Command RemarksEnter system view system-view —Enter Ethernet port viewinterfaceinterface-typeinterface-number—Set the link type of theport to hybrid port link-type hybrid RequiredSet the default VLAN IDfor the hybrid portport hybrid pvid vlanvlan-idOptionalIf no default VLAN ID is setfor a hybrid port, VLAN 1(system default VLAN) isused as the default VLAN ofthe port.