H3C S3600-28P-SI Operation Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Operation manual

Contents

H3C S3600-28P-SI Operation Manual Manual pdf 8 page image

Operation Manual – Port Basic ConfigurationH3C S3600 Series Ethernet Switches-Release 1510 Chapter 1 Port Basic Configuration1-7Operation Command RemarksAdd the current hybridport to a specified VLANport hybrid vlanvlan-id-list { tagged |untagged }OptionalFor a hybrid port, you canconfigure whether thesystem keeps VLAN tagswhen the packets of thespecified VLANs areforwarded on this port.1.2.6 Configuring Trunk Port AttributeTable 1-8 Configure trunk port attributeOperation Command RemarksEnter system view System-view —Enter Ethernet port view interface interface-typeinterface-number —Set the link type of theport to trunk port link-type trunk RequiredSet the default VLAN IDfor the trunk portport trunk pvid vlanvlan-idOptionalIf no default VLAN ID isset for a trunk port, VLAN1 (system default VLAN)is used as the defaultVLAN of the port.Add the current trunk portto a specified VLANport trunk permit vlan{ vlan-id-list | all } Optional1.2.7 Copying the Configuration of a Port to Other PortsTo make some other ports have the same configuration as that of a specific port, youcan copy the configuration of the specific port to the ports.Specifically, the following types of port configuration can be copied from one port toother ports: VLAN configuration, protocol-based VLAN configuration, LACPconfiguration, QoS configuration, GARP configuration, STP configuration and initialport configuration.z VLAN configuration: includes IDs of the VLANs allowed on the port and the defaultVLAN ID of the port;z Protocol-based VLAN configuration: includes IDs and indexes of theprotocol-based VLANs allowed on the port;