H3C S3600 Series Operation Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Operation manual

Contents

H3C S3600 Series Operation Manual Manual pdf 23 page image

Operation Manual – System Maintenance and DebuggingH3C S3600 Series Ethernet Switches-Release 1510Chapter 2 Basic System Configuration& Debugging2-3Table 2-6 Set the summer timeOperation Command DescriptionSet the name and timerange of the summertimeclock summer-time zone_name{ one-off | repeating } start-timestart-date end-time end-date offset-timeOptional2.1.7 Setting the CLI Language ModeTable 2-7 Set the CLI language modeOperation Command DescriptionSet the CLI languagemodelanguage-mode{ chinese | english }OptionalBy default, the CLI languagemode is English.2.1.8 Returning from Current View to Lower Level ViewTable 2-8 Return from current view to lower level viewOperation Command DescriptionReturn from current viewto lower level view quit This operation will result in exiting thesystem if current view is user view.2.1.9 Returning from Current View to User ViewTable 2-9 Return from current view to user viewOperation Command DescriptionReturn from currentview to user view return The composite key has the sameeffect with the return command.2.2 Displaying the System StatusYou can use the following display commands to check the status and configurationinformation about the system. For information about protocols and ports, and theassociated display commands, refer to relevant sections.