H3C S3600 Series Operation Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Operation manual

Contents

H3C S3600 Series Operation Manual Manual pdf 31 page image

Operation Manual – System Maintenance and DebuggingH3C S3600 Series Ethernet Switches-Release 1510 Chapter 4 Device Management4-34.2.5 Upgrading the BootROMYou can use the BootROM program saved in the Flash memory of the switch toupgrade the running BootROM. With this command, a remote user can convenientlyupgrade the BootRom by uploading the BootROM to the switch through FTP andrunning this command. The BootROM can be used when the switch restarts.Table 4-5 Upgrade the BootROMOperation Command DescriptionUpgrade the BootROM boot bootrom { file-url | device-name } Optional4.2.6 Upgrading the Host Software in the FabricYou can execute the following command on any device in a Fabric to use specified hostsoftware to upgrade all devices in a Fabric, thus realizing the software versionconsistency in this Fabric.Table 4-6 Upgrade the host software in the FabricOperation Command DescriptionUpgrade the host software onthe devices in the Fabricupdate fabric { file-url |device-name } Optional4.3 Displaying the Device Management ConfigurationAfter the above configurations, you can execute the display command in any view todisplay the operating status of the device management to verify the configurationeffects.

/ 34

Related manuals for H3C H3C S3600 Series