154 display garp statistics interface gigabitethernet 1/0/1 to gigabitethernet 1/0/2GARP statistics on port GigabitEthernet1/0/1Number of GVRP Frames Received : 5Number of GVRP Frames Transmitted : 2Number of Frames Discarded : 1GARP statistics on port GigabitEthernet1/0/2Number of GVRP Frames Received : 3Number of GVRP Frames Transmitted : 4Number of Frames Discarded : 2display garp timerSyntaxdisplay garp timer [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface interface-list: Specifies one or multiple ports. You can provide up to 10 port lists. By using eachlist, you can specify a single port in the form of interface-type interface-number, or a port range in theform of interface-type interface-number1 to interface-type interface-number2, where the end portnumber specified by interface-number2 must be greater than the start port number specified byinterface-number1. If no ports are specified, this command displays the GARP timer settings on all ports.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see the Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.DescriptionUse the display garp timer command to display GARP timer settings on specific ports.Related commands: garp timer hold, garp timer join, garp timer leave, and garp timer leaveall.Examples# Display GARP timer settings on port GigabitEthernet 1/0/1. display garp timer interface gigabitethernet 1/0/1GARP timers on port GigabitEthernet1/0/1Garp Join Time : 20 centiseconds
