H3C S5500-SI Series Installation Manual

Also see for S5500-SI Series: Configuration Operation manual Configuration guide Configuration guide Configuration guide

5-10Enter your choice(0-3):Step4 Select 1 in the Boot ROM update menu to download the Boot ROM software using TFTP. Then set thefollowing TFTP-related parameters as required:Load File name :update.btmSwitch IP address :1.1.1.2Server IP address :1.1.1.1The parameters are described in Table 5-2.Table 5-2 Description of the TFTP parametersItem DescriptionLoad File name : Name of the file to be downloaded (for example, update.btm)Switch IP address : IP address of the switch (for example, 1.1.1.2)Server IP address : IP address of server (for example, 1.1.1.1)Step5 Press Enter after inputting the information above. The system displays the following information:Are you sure you want to download file to flash? Yes or No(Y/N)Step6 Enter Y to start file downloading or N to return to the Boot ROM update menu. If you enter Y, the systembegins to download and update the Boot ROM software. Upon completion, the system displays thefollowing information to show the loading process is completed:Loading........................................doneBootrom updating..........done!BOOT MENU1. Download application file to flash2. Select application file to boot3. Display all files in flash4. Delete file from flash5. Modify bootrom password6. Enter bootrom upgrade menu7. Skip current configuration file8. Set bootrom password recovery9. Set switch startup mode0. RebootEnter your choice(0-9):Step7 Enter 0 to restart the device. After that, the updated Boot ROM file becomes effective.Loading host softwareSelect 1 in Boot Menu to load the host software of the switch. The system displays the followinginformation:1. Set TFTP protocol parameter2. Set FTP protocol parameter