H3C S5560X-EI Series Configuration Manual

Also see for S5560X-EI Series: Command reference Installation guide

Contents

H3C S5560X-EI Series Configuration Manual Manual pdf 35 page image

29Step Command Remarks6. Restore the defaultsettings on the interface. default N/A7. Bring up the interface. undo shutdown By default, a VSI interface is up.Displaying and maintaining VXLAN IP gatewayExecute display commands in any view and reset commands in user view.Task CommandDisplay information about VSIinterfaces.display interface [ vsi-interface [ vsi-interface-id ] ] [ brief[ description | down ] ]VXLAN IP gateway configuration examplesCentralized VXLAN IP gateway configuration exampleNetwork requirementsAs shown in Figure 13:• Configure VXLAN 10 as a unicast-mode VXLAN on Switch A, Switch B, and Switch C to provideconnectivity for the user terminals across the network sites.• Configure a centralized VXLAN IP gateway on Switch B to provide gateway services for VXLAN10.• Manually establish VXLAN tunnels and assign the tunnels to VXLAN 10.• Enable remote-MAC address learning.Figure 13 Network diagramConfiguration procedure1. Set the system operation mode to VXLAN on Switch A, Switch B, and Switch C. This step usesSwitch A as an example.