H3C S5560X-EI Series Installation Manual

Also see for S5560X-30C-EI: Installation guide

Contents

H3C S5560X-EI Series Installation Manual Manual pdf 77 page image

70GE SFPtransceivermodule andcableCentralwavelength(nm)ConnectorCable/Fibertype anddiameter (μm)Modalbandwidth(MHz × km)MaxtransmissiondistanceSFP-GE-LH40-SM1310 1310 LC Single-mode,9/125 N/A 40 km (24.86miles)SFP-GE-LH40-SM1310 1310 LC Single-mode,9/125 N/A 40 km (24.86miles)SFP-GE-LH40-SM1550 1550 LC Single-mode,9/125 N/A 40 km (24.86miles)SFP-GE-LH80-SM1550 1550 LC Single-mode,9/125 N/A 80 km (49.71miles)SFP-GE-LH80-SM1550-D 1550 LC Single-mode,9/125 N/A 80 km (49.71miles)SFP-GE-LH100-SM1550 1550 LC Single-mode,9/125 N/A 100 km (62.14miles)SFP-GE-LX-SM1310-BIDI• TX: 1310• RX: 1490 LC Single-mode,9/125 N/A 10 km (6.21 miles)SFP-GE-LX-SM1490-BIDI• TX: 1490• RX: 1310 LC Single-mode,9/125 N/A 10 km (6.21 miles)SFP cableSFP-STACK-Kit N/A 1.5 m (4.92 ft)IMPORTANT:• The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI modules must be used in pairs.• To install multiple SFP-GE-LH100-SM1550 transceiver modules on the S5560X-30C-EI,S5560X-30F-EI, and S5560X-54F-EI switches, separate these transceiver modules by othertypes of transceiver modules. For example, you can install SFP-GE-LH100-SM1550 transceivermodules in ports 1 and 2, other types of transceiver modules in ports 3 and 4, andSFP-GE-LH100-SM1550 transceiver modules in ports 5 and 6.NOTE:• As a best practice, use H3C transceiver modules and cables for the switch.• The H3C transceiver modules and cables are subject to change over time. For the most recentlist of H3C transceiver modules and cables, contact your H3C Support or marketing staff.• For more information about H3C transceiver modules and cables, see H3C Transceiver ModulesUser Guide.SFP+ portThe switch provides four fixed SFP+ ports on the front panel. To connect peer SFP+ ports over a longdistance, use SFP/SFP+ transceiver modules and fibers. To connect peer SFP+ ports over a shortdistance, use SFP/SFP+ cables. You can install the GE SFP transceiver module and cables in Table25, 10-GE SFP+ transceiver modules in Table 26, and 10-GE SFP+ cables in Table 27 in the SFP+ports.