4-22 display ospf nexthopOSPF Process 1 with Router ID 192.168.0.1Routing Nexthop InformationNext Hops:Address Refcount IntfAddr Intf Name----------------------------------------------------------------192.168.0.1 1 192.168.0.1 Vlan-interface1192.168.0.2 1 192.168.0.1 Vlan-interface1192.168.1.1 1 192.168.1.1 Vlan-interface2Table 4-9 display ospf nexthop command output descriptionField DescriptionNext hops Information about Next hopsAddress Next hop addressRefcount Reference count, namely, routes that reference the next hopIntfAddr Outbound interface addressIntf Name Outbound interface namedisplay ospf peerSyntaxdisplay ospf [ process-id ] peer [ verbose ] [ interface-type interface-number ] [ neighbor-id ]ViewAny viewDefault Level1: Monitor levelParametersprocess-id: OSPF process ID, in the range 1 to 65535.verbose: Displays detailed neighbor information.interface-type interface-number: Interface type and interface number.neighbor-id: Neighbor router ID.DescriptionUse the display ospf peer command to display information about OSPF neighbors.Note that:If no OSPF process is specified, OSPF neighbor information of all OSPF processes is displayed.If an interface is specified, the neighbor on the interface is displayed.If a neighbor ID is specified, detailed information about the neighbor is displayed,If neither interface nor neighbor ID is specified, brief information about neighbors of the specifiedOSPF process or all OSPF processes is displayed.
