9-32Parametersprotocol: Redistributes routes from a specified routing protocol, which can be bgp4+, direct, isisv6,ospf v3, ripng, or static.process-id: Process ID of the routing protocol, in the range 1 to 65536. It defaults to 1. This argumenttakes effect only when the protocol is isisv6, ospfv3, or ripng.allow-ibgp: Allows redistributing iBGP routes. This keyword takes effect only the protocol is bgp4+.cost cost: Specifies a cost for redistributed routes, ranging from 1 to 16777214. The default is 1.route-policy route-policy-name: Redistributes only the routes that match the specified route policy.route-policy-name is a string of 1 to 19 characters.type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2.Using the import-route bgp4+ command redistributes only EBGP routes, while using theimport-route bgp4+ allow-ibgp command redistributes both EBGP and IBGP routes.DescriptionUse the import-route command to redistribute routes.Use the undo import-route command to disable routes redistribution.IPv6 OSPFv3 does not redistribute routes from other protocols by default.Examples# Configure to redistribute routes from RIPng and specify the type as type 2 and cost as 50. system-view[Sysname] ospfv3[Sysname-ospfv3-1] import-route ripng 10 type 2 cost 50# Configure OSPFv3 process 100 to redistribute the routes found by OSPFv3 process 160. system-view[Sysname] ospfv3 100[Sysname-ospfv3-100] import-route ospfv3 160log-peer-changeSyntaxlog-peer-changeundo log-peer-changeViewOSPFv3 viewDefault Level2: System level
