91Field DescriptionCost Cost to destinationType Route type: intra-area, transit, stub, inter-area, type1 external, type2 external.NextHop Next hop addressAdvRouter Advertising routerArea Area IDTotal Nets Total networksIntra Area Total intra-area routesInter Area Total inter-area routesASE Total ASE routesNSSA Total NSSA routesdisplay ospf vlinkSyntaxdisplay ospf [ process-id ] vlink [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParametersprocess-id: OSPF process ID, in the range 1 to 65535.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see the Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.DescriptionUse the display ospf vlink command to display OSPF virtual link information.If no OSPF process is specified, the OSPF virtual link information of all OSPF processes is displayed.Examples# Display OSPF virtual link information. display ospf vlinkOSPF Process 1 with Router ID 3.3.3.3Virtual LinksVirtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: FullInterface: 10.1.2.1 (Vlan-interface 20)
