279Table 56 Output descriptionField DescriptionInterface-name Name of an interface running RIPngLink Local Address Link-local address of an interface running RIPngSplit-horizon Indicates whether the split horizon function is enabled(on: Enabled; off: Disabled)Poison-reverse Indicates whether the poison reverse function isenabled (on: Enabled; off: Disabled)MetricIn/MetricOut Additional metric to incoming and outgoing routesDefault route• Only/Originate: Only means that the interfaceadvertises only the default route. Originate meansthat the default route and other RIPng routes areadvertised.• Off indicates that no default route is advertised orthe garbage-collect time expires after the defaultroute advertisement was disabled.• In garbage-collect status: With default routeadvertisement disabled, the interface advertisesthe default route with metric 16 during thegarbage-collect time.Summary address The summarized IPv6 prefix and the summary IPv6prefix on the interfaceIPsec policy name IPsec policy applied on the interfaceSPI SPI defined in the IPsec policydisplay ripng routeSyntaxdisplay ripng process-id route [ | { begin | exclude | include } regular-expression ]ViewAny viewDefault level1: Monitor levelParametersprocess-id: RIPng process ID, in the range of 1 to 65535.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see the Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
