H3C S6300 Installation Manual
Also see for S6300 Series: Evb configuration guideTroubleshooting guideConfiguration ExamplesInstallation, quick startConfiguration guide
                                                           | |
Contents
| 
182. Use a cable tie to secure the power cord to the handle of the power module, as shown in Figure21.3. Connect the other end of the power cord to an AC power outlet.Figure 21 Connecting the LSVM1AC300 or LSVM1AC650 power module on the S6300-52QFswitch(1) Cable tie(2) Tighten the cable tie to secure the power cord to the handle of the power moduleConnecting the DC power module1. Unpack the DC power cord, identify the plug for connecting to the power module, orient the plugwith the power receptacle on the power module, and insert the plug into the receptacle(see Figure 22).The receptacle is foolproof. If you cannot insert the plug into the receptacle, re-orient the plugrather than use excessive force to push it in.2. Use a cable tie to secure the power cord to the handle of the power module, as shown in Figure21.3. Connect the other end of the power cord to the DC power source.Figure 22 Connecting the LSVM1DC300 or LSVM1DC650 power module on the S6300-52QFVerifying the installationAfter you complete the installation, verify that:• There is enough space for heat dissipation around the switch, and the rack is stable.• The grounding cable is securely connected. |
Related manuals for H3C S6300 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine