H3C S6890 Series Openflow Command Reference

Also see for S6890 Series: Installation guide Installation guide Troubleshooting guide Configuration Examples Configuration Examples

18Configuration information:Description : test-descActive status : ActiveInactive configuration:NoneActive configuration:Classification: VLAN, loosen mode, total VLANs(1)2In-band management VLAN, total VLANs(0)Empty VLANConnect mode: MultipleMAC address learning: DisabledTCP DSCP value: 10Flow table:Table ID(type): 0(MAC-IP), count: 0Flow-entry max-limit: 65535Datapath ID: 0x0000001234567891Default table-miss: DropForbidden port: NoneQinq Network: DisabledTCP connection backup: EnabledData-plane: DisabledPort information:Ten-GigabitEthernet1/0/3Active channel information:Controller 1 IP address: 192.168.49.49 port: 6633Controller 2 IP address: 192.168.43.49 port: 6633...Table 8 Command outputField DescriptionConfiguration information Information about the configuration.Description Description of the OpenFlow instance.Active status OpenFlow instance status: Active or Inactive.Inactive configuration Inactive configuration for the OpenFlow instance.Active configuration Active configuration for the OpenFlow instance.Classification: VLAN, totalVLANsVLANs that are associated with the OpenFlow instance and the totalnumber of these VLANs.loose mode The loose mode is used.In-band management VLAN,total VLANs Inband management VLANs and the total number of them.Connect modeConnection mode of the controller:• Single—The OpenFlow instance connects to only one controller at atime.• Multiple—The OpenFlow instance can simultaneously connect tomultiple controllers.