Command Manual – Link AggregationH3C S7500 Series Ethernet SwitchesChapter 1 Link Aggregation ConfigurationCommands1-3Table 1-2 Description on the fields of the display link-aggregation interfacecommandField DescriptionAttached AggID ID of the aggregation group to which thespecified port belongsLocal:Port-Priority: 32768, Oper key: 1,Flag: 0x00Port priority, operation key and LACPstatus flag of the local endRemote:System ID: 0x0, 0000-0000-0000Port Number: 0, Port-Priority: 0,Oper-key: 0, Flag: 0x00Device ID, port number, port priority,operation key and LACP status flag ofthe remote endReceived LACP Packets: 0 packet(s),Illegal: 0 packet(s)Sent LACP Packets: 0 packet(s)Statistics about LACP packets,including: the number of received LACPpackets, the number of illegal LACPpackets and the number of sent LACPpackets1.1.3 display link-aggregation summarySyntaxdisplay link-aggregation summaryViewAny viewParametersNoneDescriptionUse the display link-aggregation summary command to display summaryinformation of all aggregation groups, including device ID of the local end, aggregationgroup ID, aggregation group type, device ID of the remote end, number of the selectedports, number of the standby ports, load sharing type and master port number.Examples# Display summary information of all aggregation groups. display link-aggregation summaryAggregation Group Type: D -- Dynamic, S -- Static, M -- ManualLoadsharing Type: Shar – Loadsharing, NonS – Non-LoadsharingActor ID: 0x8000, 000f-e20f-ff04